01
English
Products
Optical equipment for cable TV

Network CATV 10/100/1000M Singlemode Single Fiber Media Converter

Network CATV 10/100/1000M Singlemode Single Fiber Media Converter
  • Summary
  • Features
  • Advantage
    10/100/1000M Singlemode Single Fiber Media Converter can convert Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 100M optical fiber interface (FX).  It could extend traditional 10/100/1000M Fast Ethernet to the distance of 90km through single optical fiber link.  It possesses stable performance and good quality by adopting latest IC from USA and Taiwan. It must be used in couples,because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for users to observe network operation. 

    Technical Specifications

    1.Operating standards:IEEE802.3u,10/100Base-TX and 100Base-FX;

    2.MAC addresses table: 1K

    3.Data buffer: 128K.

    4.Connectors: UTP Connector: RJ-4510/100Mbps;  Fiber Connector: SC100Mbps

    5.Cable: 

    UTP: Cat. 5 UTP cable (the max distance up to100m)

    Fiber ( Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)

    6.Flow Control

      Full Duplex: IEEE802.3x

      Half Duplex: back pressure

    7.LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.

    8.Power Requirement: AC 170 ~ 240V, DC 5V.

    9.Ambient Temperature: 0 ~ 70°C

    10.Humidity: 5 ~ 90%

    11.Dimensions: Internal power 30×110×140mm

    External power 26×70×94mm
    Fiber optic information

    Type

    connector

    Max distance

    Wavelength

    TX power

    Sensitivity

    Link Budget

    media converter-20 

    SC

    20km

    1310/1550nm

    -14~-6dBm

    -32dBm

    18dBm

    media converter -40 

    SC

    40km

    1310/1550nm

    -8/-9~-3dBm

    -35dBm

    27/26dBm

    media converter -60 

    SC

    60km

    1310/1550nm

    -5/-7~0dBm

    -37dBm

    32/30dBm

    media converter -80 

    SC

    80km

    1310/1550nm

    -3/-5~2dBm

    -37dBm

    34/32dBm


    The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.  
    Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
    The UTP port supports MDI/MDI-X auto crossover.
    Supporting 1600 bytes packet for management.
    Internal circuit of prevented thunder could greatly reduce damage of converters caused by thunderbolt induction.
    Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link.
    Converter working mode could be chosen: Store and forward switch mode, Modified cut-through switch mode, or Converter mode.